DIY Lawn Chair Storage Rack: Organize Your Garage with Angled Board Hangers

Tired of tripping over your lawn chairs or struggling to find a place to store them in your garage? This simple and practical DIY project will help you reclaim your garage space by creating a customized storage solution for your lawn chairs. Follow these steps to build an angled board hanger system that keeps your lawn chairs neatly organized and off the floor.

Materials Needed:

• Wooden boards (2×4 or similar)
• Screws
• Drill and drill bits
• Level
• Measuring tape
• Saw (circular or miter)
• Screwdriver or cordless drill
• Lawn chairs

Step-by-Step Instructions:

1. Measure and Cut Boards: Determine the length and width of the space where you want to hang your lawn chairs. Cut the wooden boards to the desired length using a saw. You will need one board for each hanger.
2. Create Angled Ends: Use a miter saw or circular saw to create angled cuts on one end of each board. These angled ends will provide a slanted surface for hanging the chairs.
3. Screw Boards to the Wall: Hold each board against the wall at the desired height and angle. Use a level to ensure that the boards are straight. Mark the screw hole locations on the board and the wall. Pre-drill holes and then screw the boards securely to the wall.
4. Test the Hangers: Before hanging the chairs, test the hangers by placing a lawn chair on the slanted surface of each board. Make any adjustments as needed to ensure the chairs hang securely.
5. Hang the Lawn Chairs: Carefully hang each lawn chair on its corresponding hanger. The angled boards will provide support and keep the chairs off the floor.
6. Stagger the Hangers: For optimal space utilization, stagger the hangers at different heights along the wall. This will prevent the chairs from interfering with each other and maximize the number of chairs you can store.

Benefits of Angled Board Hangers:

1. Efficient Use of Space: By utilizing wall space, you’re freeing up valuable floor space in your garage.
2. Neat and Organized: The hangers keep your lawn chairs neatly organized and prevent them from becoming a cluttered pile.
3. Easy Access: Hanging the chairs at an angle makes it easy to slide them on and off the hangers, even if they are bulky.
4. Customizable: You can adjust the angle and height of the hangers to accommodate different types of lawn chairs.
5. Cost-Effective: This DIY project uses simple materials and tools, making it an affordable solution for lawn chair storage.

Building angled board hangers to store your lawn chairs is a practical and effective DIY project that maximizes your garage space. By taking advantage of vertical wall space, you can keep your lawn chairs organized and easily accessible. Say goodbye to clutter and hello to a clean, organized garage that’s ready for all your outdoor adventures.