Looking for an innovative and practical way to keep your hand tools, paint brushes, pencils, and other small items organized in your workshop or garage? Look no further than this DIY project that utilizes cut PVC pipes to create a versatile wall-mounted organizer. Follow these simple steps to create a functional and efficient storage solution.

Materials You’ll Need:
- Large PVC pipes (diameter depends on the items you want to store)
- Saw (circular or miter) or PVC handsaw!
- Sandpaper
- Wall anchors and screws
- Level
- Measuring tape
- Marker or pencil
Step-by-Step Instructions:
Step 1: Measure and Cut the PVC Pipes Measure the desired length for each PVC pipe section. Using a saw, make angle cuts on one side of each pipe to create a slanted opening. The angle cut will make it easier to insert and remove items.
Step 2: Sand the Cut Edges Smooth the cut edges of the PVC pipes using sandpaper. This step ensures that there are no rough edges that could potentially harm your tools or supplies.
Step 3: Determine Wall Placement Decide where you want to install your PVC pipe organizer on the wall. Consider the height and accessibility, ensuring that it’s convenient for your needs.
Step 4: Install Wall Anchors If your wall is made of drywall, use wall anchors to ensure a secure installation. Drill holes for the anchors and then insert them into the wall.
Step 5: Attach PVC Pipes to the Wall Position the PVC pipes on the wall, aligning them at the desired spacing. Use a level to ensure they are straight. Mark the locations where you’ll be attaching the pipes.
Step 6: Fasten PVC Pipes to the Wall Secure the PVC pipes to the wall by drilling screws through the pipe and into the wall anchors. Make sure they are tightly fastened.
Step 7: Test and Organize Test the organizer by inserting your hand tools, paint brushes, pencils, or other supplies into the slanted openings of the PVC pipes. Ensure that everything fits securely.
Benefits of the PVC Pipe Organizer:
- Space-Saving: The wall-mounted PVC pipe organizer frees up valuable workspace by utilizing vertical wall space.
- Easy Access: With the slanted openings, you can easily slide items in and out of the PVC pipes without hassle.
- Customizable: Adjust the spacing and number of PVC pipes to accommodate different types and sizes of tools and supplies.
- Visual Organization: Keep your workshop or garage neat and organized, making it easy to find and access the items you need.
What Are the Best Uses for a Wall-Mounted PVC Pipe Organizer?
A DIY wall-mounted PVC pipe organizer is a versatile and inexpensive solution for decluttering workspaces, garages, craft rooms, and even kitchens. By cutting and mounting PVC pipe sections, you can create custom storage for tools, accessories, and supplies. Some of the best uses include:
✔ Garage Storage – Hold screwdrivers, wrenches, pliers, and other hand tools in labeled PVC slots.
✔ Craft & Office Supplies – Store markers, paintbrushes, scissors, and small items neatly.
✔ Bathroom & Hair Tool Organization – Keep hairdryers, curling irons, and brushes within reach.
✔ Sports Equipment Holder – Store baseball bats, tennis rackets, or fishing rods on the wall.
✔ Garden & Workshop Storage – Hang shovels, rakes, and other long-handled tools securely.
Since PVC is lightweight yet durable, it’s ideal for organizing a wide range of items without taking up extra space.
How Do You Build a Wall-Mounted PVC Pipe Organizer?
Making a PVC pipe organizer is a simple DIY project that requires just a few materials. Here’s a basic guide to get started.
Materials Needed:
- PVC pipe (choose the diameter based on what you plan to store)
- Saw or PVC pipe cutter
- Sandpaper (to smooth rough edges)
- Drill and screws (for mounting)
- Wall anchors (if not attaching to studs)
Step-by-Step Instructions:
- Cut the PVC Pipe – Measure and cut sections to the desired length, depending on the tools or items you want to store.
- Smooth the Edges – Sand down the cut edges to prevent sharp surfaces.
- Drill Mounting Holes – Drill pilot holes in each PVC piece for securing to the wall.
- Attach to the Wall – Use screws and wall anchors to mount the PVC sections securely.
- Customize as Needed – Paint the PVC, add labels, or adjust the layout based on your storage needs.
By arranging the pipes horizontally, vertically, or at an angle, you can create a customized, space-saving organizer that keeps your workspace clean and efficient.
What Are Some Creative Customization Ideas?
While a standard PVC pipe organizer is functional, adding a few creative touches can make it even more useful and visually appealing.
✔ Paint the PVC Pipes – Use spray paint to match your garage, office, or craft room decor.
✔ Add Hooks or Magnets – Attach small hooks for hanging tools or add a magnet strip to hold metal items.
✔ Install on a Pegboard – Mount PVC sections onto a pegboard for an adjustable, modular storage system.
✔ Label Each Section – Use stickers, vinyl labels, or chalkboard paint to categorize what each pipe holds.
By customizing the size, layout, and appearance of your PVC pipe organizer, you can create a wall-mounted storage solution that’s both practical and stylish!
Transform your workshop or garage into an organized haven with this DIY PVC pipe organizer. By repurposing PVC pipes, you’ll create a functional and visually appealing storage solution for your hand tools, paint brushes, pencils, and more. Enjoy the convenience of having your supplies readily accessible while keeping your workspace tidy and efficient.
As an Amazon Associate we earn from qualifying purchases through some links in our articles.