DIY GARAGE STORAGE BIN FOR LONG-HANDLED TOOLS

A tidy garage is every homeowner’s dream, especially when all the tools have their designated spots. If you’ve got a collection of long-handled tools like shovels, rakes, and brooms, this DIY garage storage bin is the perfect solution for you. With three compartments, you can easily organize and access your tools without them leaning against a wall or being tangled up. Here’s how to create your own multi-compartment storage bin:

MATERIALS NEEDED:

• Plywood or metal sheets (depending on your preference)
• Wood screws or metal screws (based on your material choice)
• Stud finder
• Level
• Drill
• Measuring tape
• Saw (for wood) or metal cutter (for metal)
• Sandpaper (if using wood)
• Paint or rust-proofing spray (optional)

STEPS TO CREATE YOUR LONG-HANDLED TOOL STORAGE BIN:

1. Planning & Measuring:
   • Determine the size of your bin, ensuring it’s tall enough to hold your longest tool.
   • Decide on the width of each compartment, allowing ample space to hold multiple tools.
2. Cutting the Material:
   • Cut the base for your bin to your desired size.
   • Cut the dividers. Ensure they are of the same height as your base’s width to create the compartments.
3. Assembling the Bin:
   • Attach the dividers to the base using screws. Ensure they are evenly spaced to create three compartments.
   • If using wood, sand any rough edges to avoid splinters or cuts.
4. Secure & Enhance:
   • Optionally, paint or spray your bin for a polished look or to match your garage’s interior. If using metal, consider a rust-proofing spray.
   • To secure the bin in place, consider attaching it to a wall using L-brackets. This will keep it from tipping over when tools are inserted or removed.
5. Installation:
   • Place your bin in the desired location in your garage, ensuring it’s easily accessible.
   • Start organizing your tools by placing the handles into the compartments.

ADDITIONAL TIPS:

• Labeling: Consider adding labels in front of each compartment to quickly identify where each type of tool should go, especially if certain tools are used more frequently.
• Base Enhancement: If you’re concerned about the sharp ends of tools damaging the base, consider adding a layer of rubber matting to provide a soft cushion.
• Mobility: Add casters to the bottom of your bin if you want it to be movable.

This DIY storage bin is a practical solution for homeowners looking to declutter their garages and easily access their long-handled tools. By following these simple steps, you’ll have a functional storage system that not only organizes your tools but also adds to the aesthetic of your garage space. No more digging around for the right tool; with this storage bin, everything is right at your fingertips!