How To Build Simple Hangers for Lawn Chair Storage

Are you tired of your lawn chairs cluttering up your garage floor? Transform your garage organization with this DIY project that will help you create custom angled board hangers for storing your lawn chairs. Follow these step-by-step instructions to efficiently store your chairs and keep your garage neat and tidy.

Step 1: Gather Your Materials

If you’re tired of leaning your lawn chairs against the garage wall or leaving them in a pile, angled board hangers provide a simple and efficient solution for storage. These angled hangers allow you to store lawn chairs off the floor, keeping your space tidy while making the chairs easy to access.

Here’s what you’ll need to get started:

• 2×4 or 2×6 lumber (for the hangers)
• Screws and wood glue
• Measuring tape
• Saw (to cut the boards at an angle)
• Drill
• Sandpaper
• Wall anchors (if mounting on drywall)

Once you’ve gathered your materials, you’re ready to start building. This project will help free up floor space and keep your garage organized—much like a sliding frame for tote organization or other efficient DIY storage solutions.

Step 2: Cut the Boards to the Correct Angle

The key to building angled board hangers is cutting your boards at the right angle to support the lawn chairs. The angle allows the chairs to rest securely while being easy to slide in and out for storage.

1. Measure and Mark the Boards:
   • Measure the length of the boards to match the size of your lawn chairs. A typical length for the hanger boards is around 12-18 inches, but you can adjust based on the size of your chairs.
2. Cut the Angle:
   • Use a saw to cut one end of each board at an angle, typically between 30 and 45 degrees. This will create the slope needed to hold the lawn chairs securely. The angled end will face upward when mounted on the wall.
3. Sand the Edges:
   • Sand down the edges of the boards to remove any roughness or splinters. This will ensure that the boards don’t scratch your lawn chairs when you store them.

Now that the boards are cut to the correct angle, it’s time to prepare them for mounting. If you’re looking for more DIY projects to improve storage or functionality, check out how to build a DIY multipurpose wooden table for even more garage or patio versatility.

Step 3: Mount the Angled Hangers to the Wall

Now that your boards are cut to the proper angle, it’s time to mount them on the wall. Proper mounting will ensure that your hangers can support the weight of your lawn chairs and stay securely in place.

1. Find the Studs:
   • Use a stud finder to locate the studs in your garage or shed wall. Mounting the hangers directly into studs ensures they can support the weight of multiple lawn chairs.
2. Position the Hangers:
   • Determine how high and far apart you want to mount the angled hangers. Typically, the hangers should be spaced wide enough to accommodate the width of the chairs when stacked. For most standard lawn chairs, positioning the hangers about 12-16 inches apart works well.
3. Drill Pilot Holes:
   • Mark the spots where you’ll mount each board and drill pilot holes into the studs. This makes it easier to drive the screws into the wood and ensures a secure fit.
4. Attach the Hangers:
   • Using wood screws, attach each angled board to the wall. Make sure the angled cut is facing upward to hold the chairs securely.

Once the hangers are mounted, test them by placing your lawn chairs on them to ensure they’re positioned correctly and can support the weight.

For additional organization solutions in your garage, check out how to make a DIY tool organizer to store long-handled instruments and keep your garage clutter-free.

Step 4: Organizing and Storing Your Lawn Chairs

With your angled board hangers securely mounted, it’s time to put them to use. These hangers will keep your lawn chairs off the floor, preventing clutter and freeing up valuable space in your garage or shed.

1. Place the Lawn Chairs:
   • Slide your lawn chairs onto the hangers, resting the top bar or back of each chair on the angled boards. The angled design will keep the chairs from sliding off, while making it easy to take them down whenever needed.
2. Add Additional Hangers for Other Items:
   • If you have extra space, you can add more angled board hangers to store other items like folding tables, ladders, or even large sports equipment. The versatility of this design allows you to customize the storage to suit your needs.
3. Label and Organize (Optional):
   • For an added layer of organization, you can label the hangers to designate which ones are for chairs, tables, or other equipment. This makes it easier to keep everything in order and accessible.

Congratulations! Your angled board hangers are now ready to keep your lawn chairs neatly stored and out of the way. Not only do they save space, but they also make it easy to grab your chairs for those spontaneous outdoor gatherings.

For more DIY storage ideas, consider building a DIY farm-style end table or exploring other creative storage solutions for your home.

Why Angled Board Hangers Are Perfect for Lawn Chair Storage

Building angled board hangers for your garage or shed offers a practical and efficient way to store your lawn chairs. Not only does it keep them off the floor and out of the way, but the angled design also allows you to easily slide the chairs in and out without hassle. This DIY solution is perfect for anyone looking to maximize space while keeping their garage organized.

Here are a few reasons why you’ll want to build these angled board hangers:

• Space-Saving: By utilizing vertical space on your walls, you free up valuable floor space in your garage, giving you more room to work or store other items.
• Easy Access: The angled design makes it easy to grab your lawn chairs when needed and store them back without the risk of them tipping over.
• Customizable: You can adjust the spacing, height, and even the size of the hangers based on the size of your chairs and available wall space, making it a flexible storage solution.
• Affordable: With simple materials like 2x4s and screws, you can create a functional storage system without spending much, all while adding DIY craftsmanship to your garage.

For even more creative ways to organize your space, check out this DIY guide on building a sliding frame for tote organization and keep your entire garage clutter-free.